November | Stock Firmware Update for SGYD from Samsung

After released SGYD Firmware Update in October, this month Samsung releases update again
This update for Regions: Indonesia, Malaysia, Philippines, Singapore, Vietnam

You can download directly from sammobile.com using Samsung KIES or via OTA (only work in stock ROM and stock Kernel)

But if you wanna flash it with ODIN, MNgez@XDA allready split it. You can download Odin Flash Package : here


if you don't know how to flash with ODIN you can read this
http://galaxyyoungduos.blogspot.com/2012/08/how-to-flash-stock-rom-via-odin.html


And if you facing some problem with Odin, you can download CWM nandroid back up here  


Great thanks to MNgez@XDA,
thanks for you good work

Status Bar MOD : Jelly Bean Style (tabbed Status Bar)

Hello SGYD users. A few a days ago I post about status bar Mod with 14 toogle.. Now I will share another statusbar Mod.. TABBED STATUSBAR with fully JB themed. This Mod made by samsoul16@XDA-dev.

 

 FEATURES

1. Fully Jb Themed
2. Tabbed Layout
3. Statusbar Greper 1.8
4. Dcsms Weather
5. Recent App Button
6. JB Lidroid 15 Toggles
7. Awesome Swipe To Remove
8. Data Traffic
9. Brightness Slider

Steps

1. Backup your System first using CWM (Needed)

2. Download Tabbed Statusbar here

3. Now copy Downloaded zip file (TaBBeD_JB_StatusBar.zip) and put it to the SD Card. Do Not put it in any folder. It ain't work.

4. Turn Off your Device and go to Recovery Mode By Pressing and Holding this Key Combination Volume Up + Home Button + Power Button.

5. Once you entered into the Recovery Mode. You will see the Blue Color User Interface where you can't use Touchscreen. Instead use "Volume Up and Volume Down to move Up and Down". And "Home Button to Select". And "Power Button used to go Back"

6. Once you entered into Recovery Mode, select "Apply Update from SDCard" option and choose downloaded ClockworkMOD which is "CWM-try1.zip".

7. When you're in ClockworkMOD Recovery,

 8. After wipe, select "Install zip from sd card" option. And then "choose zip from sdcard", Now browse the  "TaBBeD_JB_StatusBar.zip".

9. Reboot your Phone by select "Reboot System Now".

Done...

*This status bar based on EVO ROM, but it's work on any Custom ROM. If you wanna try on your stock ROM, install 14 Toggles Statusbar non deodexed Stock ROM first.. before use this status bar

Note : Do With Your Own Risk




source : XDA-Developers

Moving all data and system apps to sdcard [AKURO-DATA2SD]

In this tutorial, I use AKURO-DATA2SD which made by kurotsugi@XDA-dev. This method is made for SGY, but it's can be used in SGYD too. This method will move all data and system apps to sdcard.
This method only works for fresh Stock ROM or TechnoDuos ROM. Because if you have another apps such Link2SD, A2SD Darktremor etc installed on your device, this app willnot work (Conflict). 

Tools Needed

1. Fresh Stock ROM (see this post for detailed explanation how revert to Stock ROM)
2. SDcard with ext3 partition, (see this or this post for detailed explanation about SDcard partitioning)
3. Kernel with init.d support, such as iDuos 1.31 (see this post for detailed instruction)
4. Rooted SGYD and Root Explorer

Steps

1. Backup your System first using CWM (Optional)

2. Download aroma kuro1_2.zip here

3. Now copy aroma kuro1_2.zip to the SD Card. Do Not put it in any folder.


4. Open Root Explorer, create a new Forder named "sd" (without the quotes) in the /system

5. Turn Off your Device and go to Recovery Mode By Pressing and Holding this Key Combination Volume Up + Home Button + Power Button.

5. Once you entered into the Recovery Mode. You will see the Blue Color User Interface where you can't use Touchscreen. Instead use "Volume Up and Volume Down to move Up and Down". And "Home Button to Select". And "Power Button used to go Back"

6. Once you entered into Recovery Mode, select "Apply Update from SDCard" option and choose downloaded ClockworkMOD which is "CWM-try1.zip".

7. When you're in ClockworkMOD Recovery,

 8. After wipe, select "Install zip from sd card" option. And then "choose zip from sdcard", Now browse the  "aroma kuro1_2.zip".

9. Reboot your Phone by select "Reboot System Now".


10. Check /data/kuro_akuro.log if the app and dalvik succesfully mounted copy /data/data to /system/sd.

11.  Reboot

Done...

Note : Do With Your Own Risk

Source : XDA-dev

Windows Animation Smoother With SPARE PART.APK

Hello SGYD user, tody i will share about Spare Part.apk. An app that can make your SGYD (or other android 2.3 Ginger Bread phone) more smooth.

Just download from here then install to your Android Phones. 

How to set :

1. Open the Spare Part.apk
2. Set "Window animation" into Fast
4. Set "Transition animation" into Fast
5. Checked "Fancy input animation"
6. Obey "Font size & End button behavior"
7. Check "Haptic feedback"
8. Check "Compatibility Mode"
9. Close

Now try it from your device & feel the difference :) 

Battery Calibration [Apps] [ROOT]

Hello SGYD users, now it's time to share an apps. A favorite application that can help you calibrate namely Battery Calibration. This little app can be found in the Android Market for free, here is the link. But keep in mind, Battery Calibration only works on rooted SGYD. Calibration needs to be done after flashing a new ROM. By doing this, information that stored on "batterystats.bin" will be deleted.
Batterystats.bin is a file that stores all the activities information since Android phone battery used for the first time. If you do the calibration, all information will be erased.

How to :

1. Plug in your phone to the charger
2. Wait till it charges to 100% (or force earlier calibration with the button bellow)
3. Click "Battery Calibration'
4. Unplug your phone

That's all for now, I hope it will be usefull for SGYD or any other Android phone

Stock Firmware Update for SGYD from Samsung

Hello SGYD user, last month Samsung releases SGYD Firmware Update.
This update for Regions: Indonesia, Malaysia, Philippines, Singapore, Vietnam

You can download directly from sammobile.com using Samsung KIES or via OTA (only work in stock ROM and stock Kernel)

But if you wanna flash it with ODIN, MNgez@XDA allready split it. You can download Odin Flash Package : here

And if you facing some problem with Odin, you can download CWM nandroid back up here 

if you don't know how to flash with ODIN you can read this
http://galaxyyoungduos.blogspot.com/2012/08/how-to-flash-stock-rom-via-odin.html

Great thanks to MNgez@XDA,
thanks for you good work

Free Internet access via DroidVPN [alternative}

Recent times, I write a post about  Free Internet access via DroidVPN. In some region, it's doesnt work well. And now I will share another alternative protocol that can be used..

DroinVPN setting

As seen on the picture you can use this setting :
Protocol =  TCP
Port       = 143

This setting work well on Indonesia using Three or XL Axiata Operators

Enjoy it

14 Toggles Statusbar non deodexed Stock ROM

Hello SGYD user, today I will share "How to change your stock Statusbar with 14 Toggles Statsusbar"
14 Toggles ussualy package with Cust Rom or it's can be install only on deodexed Stock ROM.

This work IS NOT FROM ME,its from German user called Kundal. He has make it with the guide from XDA-developers. It's work fine on rooted Stock ROM (no deodexed).

Steps

1. Backup your System first using CWM (Needed)

2. Download 14 Toggle Statusbar here or here  (black)

3. Now copy Modified ROM and Patch file to the SD Card. Do Not put it in any folder. It ain't work.

4. Turn Off your Device and go to Recovery Mode By Pressing and Holding this Key Combination Volume Up + Home Button + Power Button.

5. Once you entered into the Recovery Mode. You will see the Blue Color User Interface where you can't use Touchscreen. Instead use "Volume Up and Volume Down to move Up and Down". And "Home Button to Select". And "Power Button used to go Back"

6. Once you entered into Recovery Mode, select "Apply Update from SDCard" option and choose downloaded ClockworkMOD which is "CWM-try1.zip".

7. When you're in ClockworkMOD Recovery,

 8. After wipe, select "Install zip from sd card" option. And then "choose zip from sdcard", Now browse the  "14-Toggles.zip".

9. Reboot your Phone by select "Reboot System Now".

Done...

Note : Do With Your Own Risk


source : XDA-Developers

How to delete SD Card partition

Hello SGYD users, now I want to share with you about Deleting SD Card partition.
Partitioning SD Card is needed if you want to expand your Android device internal memory, or wanna using script, tweak etc. I allready post how to create partition in here (via CWM recovery) and here (via PC/Laptop using Mini partition tool)


But if you wanna revert to the original state of your SD card –to the state it was when you bought it—or want to partition your SD card again because you want to increase or decrease the size of sd-ext partition you created, there will always be the necessity to remove your existing ext3/4 partition.

Remember playing with your SD card –such as partitioning, editing, deleting, etc—will delete all the data stored on your SD card. So, it's suggested to backup (copy) all the data of your sd-card to your computer or any other storage media.

Steps

1. Move all your data including apps and dalvik cache stored in your sd-ext partition to your internal memory. Use APPS2SDGUI app or run these commands in terminal emulator.

           su

           a2sd nocache

          a2sd remove

2. go to Menu > Settings 

3. SD card and phone storage 
4. Unmount SD card 
5. Format SD card 

Done... DWYOR

How to make autotext on Android

Hallo SGYD users, sorry it's been so long not write a new post. 

This time i will share about autotext on SGYD and it's can be applied on all Android Device.

FYI, autotext is unique character that can be created without need to type it manually. such as:
°º ° =))Hªªhªªhªªhªª ° °º  °~=) ) •• °wk .wk. wk° ••=) )~ °  (*·_ ·)??* ( ^ ^)Y ?Y (^^ ) « ßë ®ight ß @©K »

You can follow below step to create auto text on Android:

Step 1 :  To create auto text on android you need an application. This application’s name is Smart Keyboard Pro.
You can download it via Google Play .[Google Play]
Step 2 : Next, you need auto text collection in file format ‘backup.zip’ which can be downloaded at this link.
Step 3 : Install Smart Keyboard Pro and then move ‘backup.zip’ file to folder ‘smartkeyboardpro’ in SD Card.
Step 4 : go to Settings >> Language & Keyboard >> Smart Keyboard Pro
Step 5 : go to Smart Keyboard Settings >> Backup Setting >> Restore from SDCARD
Step 6 : Search Text Prediction, set to be like this:
Auto-capitalization: on
Quick fix: off (to doesn’t automatically replaced when typing)
Show suggestion: on
Autocomplete: off
Swap punctuation : off
Space after picking : off
Contact Dictionary : on/off (optional, if you want suggestion take from contact name in phone)
Always suggest: on (to appear what suggestion when typing something)
Step 7 : To ad Auto text, do following steps:

• search Custom Auto text

• then tap ‘Add Auto text’

• column 1 for word that will show Android auto text such as “haha” later will appear to be: °º ° =))Hªªhªªhªªhªª ° °º

• column 2 for Android auto text

Open file that has been downloaded by you, there are you can add so many auto text.

Step 8: After all done, return to ‘Backup’ settings menu again to create new auto text ‘backup’ which was added before. The first backup file will be overwritten by new backup you just made it.